fishingaddictsnorthwest.com

As my friend Jim would say, you can’t make a rod work for everything from Tuna to Trout.  Anyone who has been fishing for a while has come to realize that even going after just one species requires more than one rod.

A Steelhead fisherman might have one rod for side-drifting, one for pulling plugs, one for bouncing bait and another for jig and float fishing. And if he’s anything like us Bass fishermen, he’ll still want more rods!

The reason is that varying conditions and tactics require varying equipment. It’s just that simple.

When I am fishing a jig-and-pig, I want a stout rod that can take a smash-mouth attack from a big fish, then wrestle him out of heavy cover with enough authority to prevent the him from see-sawing away from me and down into an area of hazardous pad stems, rocks, sunken logs or limbs and make his escape. My brother calls such rods ‘pool cues.’

If I am fishing light soft-plastics or drop-shot rigs and finessing the fish, I want a rod with a tender, sensitive tip that will help me detect subtle taps or movements, yet with enough power to ‘stick’ the hook in when I make my move.

When I am fishing a crankbait, I need a flexible rod that lets the bait work and ‘dance’ in a way that allows me to see and feel the action, making sure that the crankbait is working how I want it to, and that will allow the fish to grab and go, without yanking the lure away before the Bass really has time to crunch it.

When I’m throwing a spinnerbait, the rod must have the flexibility and power to launch the bait as far as I want, and it must have the sensitivity to allow me to feel the bait contacting cover and feel my blades spinning. I have caught more than one Bass because the bait was still coming toward me without resistance, but the blades had stopped turning. Setting the hook – because nothing was happening! – I found that sure enough, a big fish that had taken the spinnerbait and maintained its course and speed was there on the other end!  It is crucial to be able to sense such changes, and a good rod will give you that ability.

Do you want to fish a floating, minnow-immitating stick-bait?  You’ll need a rod that will help you give subtle twitches to the bait, yet will be powerful enough to give you a good hook-set when the time comes.

Sound complicated?  It really isn’t. Choose your line size and application, and you can choose the right rod.

Almost all good rod manufacturers give you helpful information near the butt of the blank.  This includes length, power, line weight ranges,  bait weight ranges and sometimes even specific designations such as ‘Crankbait.’  There will also usually be some information, sometimes on a tag, regarding the composition of the blank and guides.

A fiberglass rod, for instance, might be a good choice for a crankbait rod, though many graphite blanks will perform extremely well too.

Here is some useful technical information about how a rod bends:

http://www.fries-rods.dk/lang/uk/rods_action.htm

And here is more good information about composition and rod flex:

http://www.tacklewarehouse.com/rodselection.html

I don’t get too caught up in the technicalities.  I simply look for a rod that will do what I want it to. Most of the time I can tell right away by first deciding whether spinning or baitcasting best suits my application, by looking at the specs on the blank, and finally by hefting, flexing and examining the rod for the characteristics I’m going to need. Sometimes I will do a little research and find out what other fishermen are using for a certain application.

If you live in or around Southwest Washington, another great resource can be found in the Fishing Department at Wholesale Sports in Vancouver.  With combined experience of over 175 years of fishing, the experts there can offer information and suggestions on all species of fish and the right rods to catch them.

You can make a rod serve several purposes, but I strongly suggest that as you become more experienced it is best to demand exactly the right rod for the right situation.  This will give you more success and help you to get more satisfaction out of your fishing.

But then, you’ll still need another rod!  Right?

Spring Chinook are starting to trickle into our great Columbia River, and with each day the numbers should get stronger. Columbia River Fishery Managers are predicting the strongest run of Spring Chinook since the 1930’s with an estimate of 470,000 returning adult salmon for the 2010 season. If the numbers are record breaking as planned then all of us fishermen should have a great season and hopefully a full punch card!

As we prepare for some great salmon fishing let’s talk about a few key tactics to catching more fish. First thing to figure out is where to fish and when, seasoned fishermen already have this down but if you are new to the sport then you better start doing some scouting. There are creel surveys posted by ODFW/WDFW which tell you how many fish were taken from each boat launch, this will get you started. Finding good holding water will improve your odds extremely. Remember that Spring Chinook tend to move very fast upriver so just because an area is good for a few days don’t mean it will produce as well a week later. Tides are also a big factor and will change with each location you decide to fish, watch the tide and know when it changes. Second is to figure out which technique you will be using. There are three techniques that are commonly used while fishing for Spring Chinook: Trolling, Anchoring, and Plunking. Trolling and anchoring should be pretty good below 205 bridge as far down river as Longview bridge. Plunking is going to be really good above I-205 this year because there will be no boats but it can also be done in the lower river.

Trolling seems to be a favorite among the hard core Springer fishermen! This technique is great because it allows you to cover a lot of water and you can go back through the same area over and over again. These fish will start moving upstream rather than holding in a specific location, with trolling you can stay with the fish which will produce better catches. Knowing when the fish move and acting on it is the hard part. Always remember to troll with the tide, not against it. Spring Chinook generally won’t chase bait against the current. Trolling is definitely more costly to fishermen for fuel and bait, but it is a lot of fun and well worth the investment!
Anchoring is a great cost effective way to catch Springers, and it produces quite a few fish when done right. Finding a seam in good holding water is the most difficult part, when you do find your spot its game on! Sardine wrapped Kwik-Fish, Plugs, or herring if the current is strong enough, are the baits of choice. Anchoring is very effected by tides and is normally only done on the outgoing tide. This technique can be lots of fun when the fishing is hot but it can also be extremely boring, come prepared with a deck of cards just in case. Also be careful of those sea lions, they tend to steal a lot of fish from anchored boats.

For you guys and gals out there that don’t have boats, Plunking is your best bet! Plunking from the shore is more difficult to take springers than in a boat but can be productive when the fishing is hot. This method is generally done by taking a long bank rod, run a 30” leader to a Spin-N-Glo tipped with sand shrimp or prawn and run a dropper line to a weight(18”-30”), try casting as far as you possibly can to get into the seam. Finding good water to bank fish from won’t be too difficult this year, the complete river between I-205 bridge and Bonneville dam is bank fishing only, this will give the bank fishermen the upper hand when the fish are really pushing through that part of the river.

Spring Chinook fishing in the Columbia River is one of the most anticipated sports among all fishermen in the great northwest. We could see more fish this year than we might ever see in our lifetime and that is just amazing! With our hopes running high and the beginning of the run at our doorstep we should start seeing more fish every day. I hope that everybody has an insane Springer season and let us keep this great sport alive.

Your fellow fishing addict,
Shaun Keller

Let’s face it, Bassing friends, January and February in the Pacific Northwest are not premium months for pursuing either Largemouth or Smallmouth. There are still catch-able fish out there, lurking in the Winter haunts we discussed last month, but it’s a cold, slow game if you want to try for them. You can review the February 2009, Bob’s Bassmaster Basics article on preparing for Spring Bass fishing. It has lots of useful information for planning, researching and just generally studying up in order to be really ready for your first major trips into Bass Paradise. For January and February, let’s talk a little bit about rods, reels, baits and other gear. Some of this information will be very basic, but these articles are purposely geared toward folks who are newer to the Bass fishing scene, or who would just like to gain a few more tidbits of useful knowledge. As always, feel free to put in your two cents worth in the Forum section. I am forever looking for new ideas, and I believe that is one of the identifying signs of any good fisherman.

Whether you are a die hard Salmon fisherman, Steelheader or Bassing fanatic, if you have been fishing very long at all you probably have some strong opinions on the relative merits of spinning gear versus bait-casting gear.

I grew up fishing with spinning gear. As a boy I would spend entire Summer days, dawn to dark, wandering up and down the local creek near our home. During the school year I would be back down at the creek, as soon as I could dodge out of old Mrs. Peterson’s class. Using worms I had dug from our garden or crawdads I caught with the worms, I would catch nice Rainbow Trout throughout the year. Many were in the 14 to 16 inch range and one monster was 20 ½ inches long. I came whistling home like Opie from Mayberry and my Dad took one look at that whopper, grabbed his gear and headed for the creek!

Dad was quite the accomplished Steelhead fisherman and had ‘mastered’ the Kalama, Lewis, Washougal and other rivers by the time I was getting good at free-lining worms or crawdad tails into likely seams in Burnt Bridge Creek. He fished with spinning gear, so I did too. The reels we had back then were fairly basic and cheap. But they worked, and we caught fish. I’ll never forget how amazed my Dad, my brother and I were when we saw our first 5 to 1 retrieve reel. It was a D.A.M. Quick and wooee, it was FAST!

On my 8th birthday my Dad walked into my classroom at school with a brand new rod and reel, handed it to me and said: “Let’s go fishin’!” The teacher and the other kids watched with open mouths as I proudly hopped out the door with my Dad (I don’t think anyone could get away with that trick nowadays!). He took me to a couple of his favorite holes on the Kalama river, set me up with an Okie Drifter rig and much to my surprise, I caught two nice hen Steelhead that day. It took me over 7 years to catch another one. Okay, Dad was a little better than me.

When I finally got into Bass fishing – in my forties – I kept seeing guys using bait-casters almost exclusively. I had seen bait-casters up on the Kalama, but Dad and I just considered them oddities and went with what had always worked for us. I would watch Bill Dance and Larry Nixon and other Bass pros on T.V. and look at pictures of them in magazines. With the exception of the Lindner brothers (them good old Northern boys), everyone was using a bait-casting rig. I remember one program when the Lindners were showing how to throw spinnerbaits with bait-casting reels. They seemed surprised at how well they worked.

I was already catching nice big Bass on my spinning gear (My Dad was horrified when he found out I was using 17 pound test line – He regularly caught summer run Steelhead on 4 lb., and he always declared that anyone using more than 8 lb. was just just ‘horsing the fish in!’), but I got curious and bought a low-profile bait-cast reel from a catalog. What a strange contraption! The spool was sitting sideways and it went around whenever you touched the handle, unlike the stationary spool on a spinning reel. It was a Right-hand reel, and I quickly became convinced that the pros must be wizards, because I couldn’t make it work right and it always felt awkward to use. I simply could not duplicate their habit of casting and then switching the rod to the other hand.

It was a revelation when I discovered that you could get bait-casters in a Left-hand version. Since I had always used my Left-hand on my spinning reel, hanging down under the rod, it worked much better for me to have a Left-hand bait-caster, sitting on top of the handle. Also, my right arm is my power or ‘fighting’ arm, so I can battle the fish in the way that is ‘natural’ to me.

So what does bait-casting gear do that a spinning reel does not do, or can not do? For one thing, it fires the line straight off the spool when you cast. The line passes through the line-leveler and there is no spiral of line – an unavoidable characteristic of spinning reels – uncoiling off the reel, then passing through large guides on the rod until it is finally traveling in a straight line. Many people believe this gives the bait-caster an edge in distance casting.

Another plus is that the bait-casting rod has more guides than the spinning rod, because the line passes over the top of the rod, rather than underneath. Since the line is moving straight from the time it leaves the reel, this does not slow the line at all, but it does force the line to follow the curve of the entire rod blank when under tension. When a spinning rod, which has fewer and wider spaced guides, is flexed under tension, the line makes some jagged, angled turns from one guide to the next, without really following the complete arc of the rod. This puts more strain on the line and does not take best advantage of the fish fighting ability of the blank.

One more advantage of the bait-casting rig is its ability to zing your bait out quickly, yet with some practiced ‘feathering’ of the spool with your thumb, it allows the bait to slow to a stop and quietly ‘kiss’ the water at the end of the cast. Once a spinning outfit has launched your bait, your gear is going to crash into the water with a little more force and noise, even if you try to give it a gentle toss. If you are stalking spooky fish, or if you simply do not want to alert your prey to your presence, a bait-caster can be just the thing! The only way to compensate with a spinning rig is to go to lighter gear, which you may not be able to cast as far.

Lighter gear is still the strong suit of the spinning outfit. You can throw very light weights and baits very easily with them. This makes it a cinch to ‘skip’ light baits in under low-hanging brush or tree branches, or underneath docks. Bait-casters have traditionally been used for heavier weights and baits, and unless you have one of the newer, low-profile bait-casters, it will be difficult to achieve the same results. Even with the finest of the high-end bait-casters, it will take some practice to ‘skip’ light baits without backlashes.

Now we come to it, the misery of the backlash or ‘birds nest.’ No reel, bait-caster or spinning, should ever bring in loose or ‘slack’ line. You are just asking for a tangle or stray loop caught in the wrong spot on the reel. As for outgoing line, the spinning reel casts reliably, simply with the release of the line from your finger. The bait-caster, not so much! You must adjust the braking of the spool, or it is very liable to have an over-travel problem, continuing to spin after your bait has hit the water. This will produce a birds nest so glorious it could end or seriously delay your time on the water. Even with the brake adjusted properly, a new breeze can produce enough pressure on your bait and line during flight to cause it to slow, while the spool happily whirls around, throwing out loose line that turns into tight knots.

The best bait-casting reels have more than one kind of braking system. They help you ‘fine tune’ the spool. Some have magnets and/or designs that adjust centripetal force on the spool. Some have other specialties, such as ‘twitching bars’ that allow you to bring in small amounts of line with your thumb without even touching the reel’s handle (One hand twitching or hopping of baits), and some have ‘flipping switches’ which facilitate short-distance ‘flipping’ or ‘pitching’ techniques. Whichever bait-casting reel you choose, it will take some time to ‘make your peace’ with it. But you will enjoy its advantages in various situations.

I now fish with an equal number of bait-casters and spinning outfits when I hunt Bass. I adapt them to my needs, the kinds of baits I am throwing and the conditions I am facing. I still love the spinning reel, but the bait-caster is a welcome addition to my arsenal, and I understand why old Bill Dance loves his. In fact, I fish with Quantums, just like Bill. Other great brands include Shimano, Pflueger, Abu Garcia, Daiwa and others that offer high-end, smooth-casting reels.

Take a look at some common features on the spinning and bait-casting reels in the pictures provided. On the bait-caster you will see the large ‘star drag,’ your fish fighting friend, and the smaller brake knob. On the side opposite the brake knob on the Quantum Energy there is a dial for ‘fine tuning’ the travel of the spool. This is a common feature of good reels. The line-leveler at the front of the reel travels back and forth and stacks the line on evenly during the retrieve.

On the spinning reel, the large dial on top of the reel is the drag. On the Quantum Energy shown, the drag is composed of stacked ceramics, making it smooth and uniform in the pressure it applies. The line roller that guides line on and off of the spool should be large and should turn freely, to lessen the sharp turn of line from rod to spool in order to avoid line twist and/or damage. At the rear of the reel, as in most spinning reels, is the ‘anti-reverse’ switch. On good reels, it should be ‘infinite’. That is, it should prevent the reel from reversing, no matter in what position the handle is stopped.

Now is a good time to clean and lubricate your reel, and to spool on new line for the coming season. Consult your owner’s manual for recommendations for your particular reel. I find Quantum Hot Sauce oil and grease to be the best lubricants for my gear.

Next month we’ll talk about fishing rods, line, baits and other gear that Bass fishermen need to consider.

In the meantime, why not go fishing? Come on! It’s not that cold!

Spring time is so close we can all almost hear the first honey bee zip by our ear, we can picture the flowers and trees blooming across the land, and we can smell the spring Chinook coming back from their long 3-4 year journey in the ocean. That’s right, with spring time just around the corner, so is the arrival of one of the most sought after fish there is. There is something that a spring Chinook does to all avid fishermen that cannot be explained. Maybe it’s the fact that these fish are extremely aggressive and usually will bite exactly what is put in their face, maybe it’s the fact that these fish can rip line off your reel at about 35 feet per second, or maybe it’s the fact that these fish are the best eating fish you have ever sunk your teeth into. If these fish can make it past all the rath of sea lions and other obstacles a good run of these fish will be heading for the Cowlitz and North Fork Lewis Rivers.

The Cowlitz River is going to be your first and best bet out of the two rivers to pick up some springers. A year ago the estimated return was 4,100 and the run came back stronger than predicted at 4,900. The predicted run this year on the Cowlitz is 12,500 fish, with a spawning need of 1,250 fish. If this return happens it would be double what the 5 year average has been, which pretty much means GAME ON! A majority of these fish are going to be bonked at the mouth of the Cowlitz. The technique best for picking up fish here is to anchor up based on the tides. Every fisherman out there has their own technique and spots of where these fish travel, the rule of thumb is most fish will be in 6-25 feet of water. Find that depth and anchor. There are many lures of choice but Luhr Jensen Kwik fish is the most popular. Sizes K-13 to K-16, with the K-14 & K-15 the most common. The larger sizes are used when the current slows down, the smaller sizes are good when there is faster current. On the belly of your kwikfish place a sardine fillet and attach it using stretchy thread. This will make your plug give off a very oily scent to the springers heading its way. 50″ leaders & 18″ to 26″ lead lines are industry standard. For weight you can use 2 or 8 ounces depending on the depth and current of the water.
If you’re not looking to anchor fish another great way to pick up springers in the Cowlitz is to back troll for them. The method of choice is going to be either back trolling plugs or bait and diver. You’re going to use the same set up as anchored but you will be trolling against the current with your kicker motor slow enough to allow the boat to back down with the current. This can be a very effective method! Launch at either barrier dam or blue creek and work around that area.
If you’re reading this article and getting sad because you don’t have a boat, don’t worry because tons of fish are caught on the Cowlitz by bank fishermen. Plunking is highly effective on this river and there are lots of places to do it. From your fishing pole, use a 15 to 25-pound mainline and two 8mm beads up your line, then tie a size 3 swivel and a 32-inch piece of 30-40 pound mono. Run up a large slider followed by two more 8mm beads and then another size 3 swivel. Tie on another 36-inch 15-20 pound leader and size 2 Spin-N-Glo with two 5mm red beads and a double 2/0 hook. For bait you can use sand shrimp or cured prawns. Some good places to give a chance are the high bank hole, which is located across from Delameter Road just below Four Corners; this is one of the best holes on the river. Another good bet would be the mouth of the Toutle Located on the east side of the river, take I-5 exit 49, head east and take the first left, which is a frontage road. Travel about 2 miles to the parking area above the train bridge at the Burlington Northern-Sante Fe gate, park there and it’s about a mile walk.
The Lewis this year is also expected to get a better than normal Spring Chinook numbers. The forecast a year ago was 2,200 and the actual run was 1,900 which were worst of the decade. This year the expected number back is 6000, which if it turns out could make for a really good year. The hatcheries need 950 spring Chinook for spawning purposes. I talked to Paul Ambrose from Great Northwest Rivers Guide Service (www.greatnwrivers.com) He said that the technique of choice in the north fork is to hover fish, simply put hover fishing is a super slow back troll technique where you “hover” over the hole and wait until you get a bite. Standard technique is to let your bait hit the bottom then reel up 2 cranks and hold it, the bite is not very heavy and you should set the hook after a few “taps”. Most people use cured eggs with sand shrimp. You can do this in any significantly deep hole you find and it will hold fish. I like to also use mackerel and sardine with eggs. Have you heard the saying; “early bird gets the worm.” On the North Fork this can really pay off. If you can use bait/diver on Johnson creek flats first thing in the morning that always produces fish, and quite a few doubles. You can also use cut plug herring and sardine and back troll them on this river.
On another note the Kalama River hasn’t had the best of numbers in the past years and it looks like the forecast for this year isn’t going to be much better. The 2009 return of 350 was the second worst since at least 1980. The only worse year was 338 adults in 1985. This year a weak 900 fish are expected to return with the spawning goal for the hatchery of 500 spring Chinook. Even with these numbers, talking to Monty Thierry of Reel Adventure Guide Service (www.reeladv.com), he assures me that fish can still be taken, so don’t let that out of your radar for a possible on catching some spring Chinook this year. These fish are the best table fare the great pacific northwest has to offer, and it looks like all these rivers this year are going to put a lot of it on all of our tables! Happy Fishing!
Your Local Fishing Addict,
Marlin LeFever

Published in March 2010 Issue of Northwest Sportsman Magazine

Fishing is slowing down a bit and we are in between runs. Anglers are getting frustrated and worn out because fishing is getting tougher and tougher. Many people start to give up and stay off the water until summer. It happens every year, but there is still fish in the rivers to be caught!

Most steelhead anglers have a certain comfort zone they do not like to break, but don’t be afraid to try something new. Get away from places that get fished by a hundred people every day, walk that extra mile upstream to find that secluded hole. Like one of my good friends always says, “I don’t let the fish come to me; I go where the fish are”. If you fish a spot hard for a half hour picking each and every seam apart with no luck then it’s time to move on. Taking that extra effort to get away from everyone else will greatly increase your odds of catching more fish this time of year.

Switching up your gear a little bit is always a good idea. You have to remember that these fish have been in the river for a while now so they have had just about everything thrown at them, so don’t be afraid to try something that might look a little more natural. Also if you have not tried any scents yet this year it might give your bait that little extra to entice the fish to bite, but it can also be your worst enemy so be careful with it. One of my personal favorite tactics for enticing steelhead to bite when they just will not cooperate is tipping my jig with a little bait. It gives you a little reassurance when fishing.

When all has failed and the fishing just really sucks then it’s time to move on. I use times like these to go scout other rivers and look for future fishing spots. If one river is not producing fish, there is another river that is. With a little research online and a few phone calls to local shops you can find rivers and streams that still have lots of fish. This will also help you choose what tactics and gear to use when fishing a river you haven’t fished before.

Finding steelhead is only as frustrating as you let it be. Being a little adventurous and exploring new tactics will pay off if you put in the time and effort. Keep pursuing the elusive steelhead that swim in our rivers and let us do everything we can as fisherman to keep them here.

Your Fellow Fishing Addict,
Shaun Keller