fishingaddictsnorthwest.com

Spring Chinook are starting to trickle into our great Columbia River, and with each day the numbers should get stronger. Columbia River Fishery Managers are predicting the strongest run of Spring Chinook since the 1930’s with an estimate of 470,000 returning adult salmon for the 2010 season. If the numbers are record breaking as planned then all of us fishermen should have a great season and hopefully a full punch card!

As we prepare for some great salmon fishing let’s talk about a few key tactics to catching more fish. First thing to figure out is where to fish and when, seasoned fishermen already have this down but if you are new to the sport then you better start doing some scouting. There are creel surveys posted by ODFW/WDFW which tell you how many fish were taken from each boat launch, this will get you started. Finding good holding water will improve your odds extremely. Remember that Spring Chinook tend to move very fast upriver so just because an area is good for a few days don’t mean it will produce as well a week later. Tides are also a big factor and will change with each location you decide to fish, watch the tide and know when it changes. Second is to figure out which technique you will be using. There are three techniques that are commonly used while fishing for Spring Chinook: Trolling, Anchoring, and Plunking. Trolling and anchoring should be pretty good below 205 bridge as far down river as Longview bridge. Plunking is going to be really good above I-205 this year because there will be no boats but it can also be done in the lower river.

Trolling seems to be a favorite among the hard core Springer fishermen! This technique is great because it allows you to cover a lot of water and you can go back through the same area over and over again. These fish will start moving upstream rather than holding in a specific location, with trolling you can stay with the fish which will produce better catches. Knowing when the fish move and acting on it is the hard part. Always remember to troll with the tide, not against it. Spring Chinook generally won’t chase bait against the current. Trolling is definitely more costly to fishermen for fuel and bait, but it is a lot of fun and well worth the investment!
Anchoring is a great cost effective way to catch Springers, and it produces quite a few fish when done right. Finding a seam in good holding water is the most difficult part, when you do find your spot its game on! Sardine wrapped Kwik-Fish, Plugs, or herring if the current is strong enough, are the baits of choice. Anchoring is very effected by tides and is normally only done on the outgoing tide. This technique can be lots of fun when the fishing is hot but it can also be extremely boring, come prepared with a deck of cards just in case. Also be careful of those sea lions, they tend to steal a lot of fish from anchored boats.

For you guys and gals out there that don’t have boats, Plunking is your best bet! Plunking from the shore is more difficult to take springers than in a boat but can be productive when the fishing is hot. This method is generally done by taking a long bank rod, run a 30” leader to a Spin-N-Glo tipped with sand shrimp or prawn and run a dropper line to a weight(18”-30”), try casting as far as you possibly can to get into the seam. Finding good water to bank fish from won’t be too difficult this year, the complete river between I-205 bridge and Bonneville dam is bank fishing only, this will give the bank fishermen the upper hand when the fish are really pushing through that part of the river.

Spring Chinook fishing in the Columbia River is one of the most anticipated sports among all fishermen in the great northwest. We could see more fish this year than we might ever see in our lifetime and that is just amazing! With our hopes running high and the beginning of the run at our doorstep we should start seeing more fish every day. I hope that everybody has an insane Springer season and let us keep this great sport alive.

Your fellow fishing addict,
Shaun Keller

As avid Salmon, Steelhead, and Trout fishermen we all can appreciate the advantages that floating the river can give us. Many times I find myself wondering what boat I like better, a pontoon boat or a drift boat. There are so many great things about each craft, and they both get you down the river to those untouchable holes which most bank fisherman cant access. Let’s take a moment to go over the pro’s and con’s of each boat, so you can decide as a fishermen which one suites your needs better.

Drift boats are definitely the most popular and sought after floating device for many reasons. This boat will fit multiple people and tons of gear, which makes it the perfect craft for guiding. Drift boats are also designed to glide easily across the water to make for less strain while oaring. They come in all different shapes and sizes, and are made from many different materials such as aluminum, fiberglass and even wood. Any fisherman can appreciate how comfortable and spacious these boats are, especially when being out on the water all day.

Although there are so many great factors to having a drift boat, I still have couple of issues with them. Drift boats can be extremely loud from bouncing off rocks and scraping bottom which tends to scare fish and let them know your presence. Fishing is all about being elusive and not being seen. Water levels can drop making floating a drift boat very hard if not impossible, then you’re stuck hiking around like everyone else. I also feel that fishing out of a drift boat by yourself can be a little difficult at times, especially launching and loading your boat.

Pontoon boats are not quite as popular as drift boats but are very capable and user friendly crafts. I find that pontoon boats are great for beginners because if you can’t avoid a rock or a log, most of the time you can just go right over it! These boats are also very quiet and can easily be navigated in tight spots. When the river is low these crafts are good to go, they float in 3 inches of water and if you get stuck you can easily drag them to deeper water. When Drift boats can’t float the river, Pontoon boats can!
There are also a few downsides to pontoon boats. With Pontoon boats you are limited to how many fisherman that can float with you, there are 2 and 3 seat pontoons but they are big and can get really expensive. Gear storage can be very limited, and normally you are limited to 1 or 2 fishing rods. There are platforms for a box or a cooler and they usually have a number of pockets but you have to limit yourself to what gear you bring. It also is very hard to pull plugs and bait-diver set ups because lack of hands. If you don’t have an anchor set-up you are usually forced to pull to shore to fish the hole, if there is no bank access I run a rope across the front of my boat so it can’t float away and I wade while fishing.
I hope that this information could help you on your decision on which boat would fit your needs best or maybe both if it’s in your budget. Each boat is a great at floating the river and will do so for many years with the right maintenance. While on your next adventure down your favorite stream, whether it is in a Drift boat or a Pontoon I hope you catch many fish and have a safe float.
Your fellow fishing addict,
Shaun Keller

We finally got the rods in the water around 8pm, setting ourselves up for a night of steelhead fishing! Pulling lighted plugs and glow in the dark Spin-N-Glos with sand shrimp. Everything was perfect, the weather, the water, and fishing with your best buddies. Anticipation was high; it was up to the fish now.

Summer Steelhead, Salmon, and sturgeon fishing the Columbia River and its tributaries can be an angler’s haven, thousands of salmon and steelhead poor over the dams every year on their journey upstream. Chinook salmon reaching over 40lbs, more steelhead than you can shake a stick at, and lots of keeper sturgeon! It truly is a great time to be fishing this Columbia River fishery.
Summer Chinook fishing is extremely hot! With fish averaging from 16-22 pounds and some well over 30 lbs, you really can’t beat fishing for these monsters. Sardine wrapped kwik-fish and Spinners are extremely productive. This year the season runs straight through July so we get a lot of time to target these huge chromers. Water depth and current flow are extremely important, try to stay in between 8-20ft of water on a normal day but some day’s fish are being caught as deep as 30ft of water. According to the preseason forecast there are almost 90,000 Summer Chinook expected to return to the Columbia this year! These Summer Chinook are by far the best tasting fish and they put up a heck of a fight.
Steelhead numbers over the dam continue to grow! Lots of fish are being caught in the lower river system already and it will only get better. A lot of places allow night fishing as well as day fishing so you never have to stop! Summer steelhead will continue to trickle into our river systems all through summer and into early fall. These fish have tons of stamina and will give you quite a show when hooked! Fishing Spin-N-Glos with sand shrimp, spinners, and small kwik-fish are all great ways to pick up steelhead in the Columbia. When it comes to night fishing, pulling lighted plugs and rigging up a glow in the dark Spin-N-Glo will knock them dead! There are so many fish and a ton of time to go catch them, it is definitely worth it!

Sturgeon is also a hot summer fish on the minds of many anglers! Sturgeon in the Columbia River vary from 20 inches to 20 feet! A keeper sturgeon will have to be within 42inches and 60 inches, making it difficult sometimes to find a fish to put on your dinner table. These fish are very hard fighting (some say the hardest), and taste amazing if prepared right. My favorite is fishing for oversize sturgeon! These monsters average between 6-12ft long, they will tear you up and keep fighting for up to an hour or more. There are many different types of baits used for sturgeon. Sand shrimp, smelt, anchovies, herring, sardines and squid all work well, make sure to use lots of scent also. If you are after the big fella’s then try a fresh whole shad.

We are all very lucky to get to enjoy this great Columbia River fishery. I hope that everybody will help preserve and protect our waters we are so fortunate to have here in the great northwest and enjoy every last minute you have on them. Whether its salmon, steelhead, or sturgeon fishing this summer I hope to all the best of luck!

Your Fellow Fishing Addict,
Shaun Keller

Well, here we are in another year for great trout fishing. The past winter, or lack there of, is hopefully going to be a big plus come June. The lack of snow and our mild late winter/early spring time provides a promising look at what is in store for us. Little snow in the mountains means little to no run-off, which botched the June opener in 2008. Last year was alright, but the water was still ashy on glacial streams and made them run a little higher than we would like, but this year should be picture perfect, knock on wood.

So this spring I encourage everyone to get out and do a little early fishing on some of the year-round trout waters, like the Skagit, which a portion of is open for all trout, including bull trout. Some of these year-round rivers would be a great place to get some early fishing in because of the fact that most guys who fish these rivers during the winter and spring months are targeting steelhead, making it easier to target trout with smaller streamers and dries. Some other rivers to look into fishing include the Middle fork of the Snoqualmie, which has selective gear rules, and part of the Yakima , which is open year round for brook trout. Also you can find other rivers to fish by doing a little work at home. Get your fishing regulations out and scour the pages for year-round listings, and call fly shops or guides in the areas you want to try to fish.

Preparing for a trip to one of these rivers is a must. I don’t recommend just heading out with your usual gear in hopes of catching fish. Call the local shops to see what they recommend you take with you, let them know where you are from and let them know you when you will be in the area, so they can give you all of the specifics. They may have some hatches that we don’t get this early, or special flies you may have never heard of. Don’t forget to stop at the shops you call and mention that you talked to them on the phone. This is always good because they may not give you all the secrets over the phone, but may be more willing if you actually use the shops, even if it’s just for a few extra leaders or flies.

So let’s talk about some of the things that are always good to take, that most of us already have. Woolly buggers are always a good pattern to throw and they will usually produce fish. Go to any local store that carries flies and check out some of the new developments in these patterns as well, you just might find your new favorite pattern.. You can also always count on the trusted favorite nymphs and dries. There are a lot of hatches that occur at roughly the same time everywhere, like midges or blue winged olives (BWO).

Aside from streams, you also have lakes as an option. Like I mentioned before, we had a pretty mild winter, so a lot of the lakes that would usually still be frozen over are open, and haven’t had much pressure for a while. While the gates may be closed still, you can always hike in with a float tube or pontoon and expect some good fishing. If you find the lake you head out to is still mostly frozen, don’t turn around and go home. Look for places where small streams are feeding in there will usually be enough open water to cast to from the shore. These places can often provide some of the best fishing anywhere on the lake. The fresh water brings in tons of food for fish, causing them to school up around the openings in the ice. Try tying on nymphs or cripples and let them dead drift from the moving water into the deeper still water, and be ready to set the hook because these fish will be hungry. You can also throw woolly buggers imitating smaller fish. There will always be small fish coming into these areas to gorge themselves on the fresh food source in hopes of getting bigger, and the big fish love to eat them.

Another necessary preparation for the summer months to come is checking your gear. If you haven’t fished for a while, things can get kind of worn out and old, mainly your lines and leaders. I always highly recommend buying new line at least once a year, and always use fresh leaders because who knows how long they sat in a store before you bought them and stored them with your trout gear all winter. Flies are always good to check as well. I hate tying on a fly only to find that the hood has weakened from sitting in a box too long. Take a selected amount of flies out and give the hook a little tug, you’ll probably find that some of the cheaper flies have hooks that will break behind the material from being put away wet and rusting out. It would suck to hook a good fish and have the hook break or bend.

Something that people often overlook is checking waders and wading boots. I’ve had waders that were in perfect shape when I put them away, but from being folded up for a while developed weak spots that turned into small leaks. With your wading boots make sure the soles are still in good shape. Sometimes the thread can wear out causing the soles to separate in spots, which can be dangerous in the water. Also check your laces, you don’t want to get out there and have the laces break because you never want loose boots when walking on wet or slippery rocks.

I hope you all will take this advice to heart, and get out there and try some great spring fishing. I know that all hardcore trout fisherman will enjoy themselves, even if you don’t catch fish. Hell, anything beats staying in town daydreaming about the summer fishing we all look forward so much. An early trip and that first fish of the season always makes the time waiting for June go much quicker. So good luck, and good fishing.

Your local Fly Fishin’ Addict, the Troutbum89

As my friend Jim would say, you can’t make a rod work for everything from Tuna to Trout.  Anyone who has been fishing for a while has come to realize that even going after just one species requires more than one rod.

A Steelhead fisherman might have one rod for side-drifting, one for pulling plugs, one for bouncing bait and another for jig and float fishing. And if he’s anything like us Bass fishermen, he’ll still want more rods!

The reason is that varying conditions and tactics require varying equipment. It’s just that simple.

When I am fishing a jig-and-pig, I want a stout rod that can take a smash-mouth attack from a big fish, then wrestle him out of heavy cover with enough authority to prevent the him from see-sawing away from me and down into an area of hazardous pad stems, rocks, sunken logs or limbs and make his escape. My brother calls such rods ‘pool cues.’

If I am fishing light soft-plastics or drop-shot rigs and finessing the fish, I want a rod with a tender, sensitive tip that will help me detect subtle taps or movements, yet with enough power to ‘stick’ the hook in when I make my move.

When I am fishing a crankbait, I need a flexible rod that lets the bait work and ‘dance’ in a way that allows me to see and feel the action, making sure that the crankbait is working how I want it to, and that will allow the fish to grab and go, without yanking the lure away before the Bass really has time to crunch it.

When I’m throwing a spinnerbait, the rod must have the flexibility and power to launch the bait as far as I want, and it must have the sensitivity to allow me to feel the bait contacting cover and feel my blades spinning. I have caught more than one Bass because the bait was still coming toward me without resistance, but the blades had stopped turning. Setting the hook – because nothing was happening! – I found that sure enough, a big fish that had taken the spinnerbait and maintained its course and speed was there on the other end!  It is crucial to be able to sense such changes, and a good rod will give you that ability.

Do you want to fish a floating, minnow-immitating stick-bait?  You’ll need a rod that will help you give subtle twitches to the bait, yet will be powerful enough to give you a good hook-set when the time comes.

Sound complicated?  It really isn’t. Choose your line size and application, and you can choose the right rod.

Almost all good rod manufacturers give you helpful information near the butt of the blank.  This includes length, power, line weight ranges,  bait weight ranges and sometimes even specific designations such as ‘Crankbait.’  There will also usually be some information, sometimes on a tag, regarding the composition of the blank and guides.

A fiberglass rod, for instance, might be a good choice for a crankbait rod, though many graphite blanks will perform extremely well too.

Here is some useful technical information about how a rod bends:

http://www.fries-rods.dk/lang/uk/rods_action.htm

And here is more good information about composition and rod flex:

http://www.tacklewarehouse.com/rodselection.html

I don’t get too caught up in the technicalities.  I simply look for a rod that will do what I want it to. Most of the time I can tell right away by first deciding whether spinning or baitcasting best suits my application, by looking at the specs on the blank, and finally by hefting, flexing and examining the rod for the characteristics I’m going to need. Sometimes I will do a little research and find out what other fishermen are using for a certain application.

If you live in or around Southwest Washington, another great resource can be found in the Fishing Department at Wholesale Sports in Vancouver.  With combined experience of over 175 years of fishing, the experts there can offer information and suggestions on all species of fish and the right rods to catch them.

You can make a rod serve several purposes, but I strongly suggest that as you become more experienced it is best to demand exactly the right rod for the right situation.  This will give you more success and help you to get more satisfaction out of your fishing.

But then, you’ll still need another rod!  Right?

Fishing for steelhead with a fly is one of the most difficult ways to be a successful steelhead fisher. One contributing factor is the deterioration of local fisheries due to habitat degradation and excessive harvest from commercial fishers. Even with the odds against the angler here are several techniques that will produce action.

#1. Deep swing with retrieve-

This is an effective way to catch fish in deep water. Stand upstream of the fish, cast across the water and a little downstream. Strip enough line to get your fly to the depth of where you think the fish are holding. Let the fly swing through the drift until its below you. Retrieve the fly at the desired speed, try switching speeds to find one that works.

#2. Dry fly swung-

Cast your fly across the current and down stream a bit, then let the current swing the fly until it is hanging below you. Walk downstream a little to cover all the water fish may be holding. Effective flies for this need to be super buoyant, such as the waller walker and riffle dancer.

#3. Nymphing-

Cast your fly well upstream of the targeted area and allow the fly to drift naturally with the water. Using a strike indicator is suggested and helps keep the nymph at a desired depth. Another trick is to add on a bead trailer about 10inches below the nymph. Make sure the bead isn’t against the trailer hook, this can cause missed hooksets.

#4 Wet fly swung-

Cast the fly across the river and a touch downstream, allowing the current to swing the fly downstream. Take a couple steps downstream to cover all the desired water. Copying the same technique used in trout fishing in streams. An easy method to cover a lot of water.

#5 Wet fly retrieved near surface-

Cast across the river, either upstream or downstream, and simply retrieve your fly by stripping in the line with either long slow strips or short fast strips. And you be the judge on what is attracting the most fish.

Even though steelheading on a fly can be difficult and frustrating, it is definitely one of the most rewarding experiences a fisherman can have. It may seem like an endless struggle to master the arts, but I’ve seen on many occasions avid fly-steelheaders out fish conventional tackle fisherman. Good luck in using these techniques, it takes practice and some dedication to make them effective but I assure you its rewarding in the end. Good luck, watch the back cast, and keep your lines tight.

-tight-lines -troutbum89

Fall fishing brings many opportunities to fisherman on the Columbia River. The best part about this time of year is the size of the fish. Chinook are the main target on the Columbia, and there’s a good reason for it. Imagine hooking into a 40-50lb salmon and bringing it to the boat. Well this is the time of year for it. With anticipated strong runs of salmon migrating up the river many fisherman are looking to hook into the big one. Nothing is more relaxing than sitting on a boat with friends enjoying the warm weather and hooking monster salmon. With these simple tips and tactics you can go out and hook one yourself.

Fishing for salmon this time of year is a little different but very easy and straight forward. With warm water temperatures, it can be a struggle to get a bite at times. Your best luck will be found in the deeper water where the water will be cooler and fish will be more active. Try and locate water between 40-50ft but be careful not to get into the shipping lane or you and your boat will end up at the bottom of the big C. To start out you’ll want to check the tides for the area you are fishing, because you’re always going to be fishing the outgoing tide. Fishing the outgoing tide will allow you to stay on anchor and for your lure to properly work. The setup is simple, I start with my main line which is around 50 or 65lb braided line. I connect the line to a spreader and then attach my weight. As far as line lengths go, the most typical setup is a 5×5. This means 5ft of leader from the spreader to the lure and another 5ft from the spreader to the weight. Just because a lot of people use those lengths doesn’t mean it’s the only thing that’s going to work so don’t be afraid to vary lengths until you find what is best for the day. All that’s left on the setup now is just run your leader to your lure. The main lure used this time of year is called a wobbler. There are several companies that make these lures, top choices are, the Simons, Alvins, Clancy, and Brads Wobblers. Colors will always vary from day to day so carry a selection. Reliable colors are blue and nickel or chartreuse and nickel. As far as how much lead to use, it will depend on how deep you are and how strong of a tide you have. I will use anywhere from 8-12oz of lead most of the time. Sometimes as an extra attractant you can add scent there are many to choose from but my favorites are shrimp, sardine, WD40 or herring.

With these tactics you now have the basics on how to fish for fall Chinook on the Columbia. All that is left to do is head out to river and put it all to work and enjoy the weather and fishing with your friends Get off the computer now and get out there and put a 40 pound Chinook in your boat!

One of the most deadly and effective ways to target steelhead in low clear water is with spinners. For some reason summer run steelhead just can’t seem to resist the vibration and flash of a spinner in their face. Most steelhead fishermen quite often use spinners to fish for steelhead in all the summer months and they use this technique for a reason….it works!!!

When I first started steelhead fishing for summer fish I was exclusively all about bobber and jig fishing and that was it for me! One day while out on the river, I was walking into one of my spots and another fisherman was walking out. I couldn’t help but notice that he was carrying a limit of fish! I said, “Good job man, what did you pick those beauties up on?” He said, “I was using a #2 tarnished brass vibrax spinner.” He showed me his lures and I took some pictures for him of his fish, and I went on my way up to my whole. I kept thinking the whole time how I almost didn’t believe that was what he was using. I had heard of spinners doing well but this spinner to me just looked really ugly, like why would any steelhead hit that lure? From then on I was determined to try to catch my first steelhead on a spinner. I had grown up fishing for trout in small streams with spinners so I knew how to fish them, it was just getting to the store to pick up some steelhead spinners and getting back out on the water to fish them. For me the lure of choice was a blue fox in brass color size 2. This spinner from then on out was the most deadly spinner I have ever used for summer steelhead fishing. The first time out I spotted a fish in some low clear water just below a fast riffle. I casted the spinner upstream and let it drift right into him……WHAM!! She almost tore the rod right out of my hand! After a couple acrobatic jumps and good runs, I landed a nice bright hatchery hen. This was my first ever steelhead on a spinner. I began to master the art of fishing with spinners and they became my lure of choice when fishing for summer steelhead in low clear water.

Picking the lure is easy when it comes to summer steelhead. You want something small and something not to bright, as bright colors will often spook the fish. Some choices of lures I would go with are Blue Fox Vibrax in Brass, Copper, Silver and Blue, or Silver and Purple. All of these 4 colors seem to produce. On very bright sunny days you want to use the darker colors like brass and copper. On Overcast days you can get the fish on silver and blue or silver and purple. I like to fish the spinner with light spinning gear. I prefer a 7 foot Certified Pro Lamiglas rod with a pflueger 8035 spinning reel. For fishing line, I use a 6 pound maxima ultra green. Now you’re hooked up and it’s time to get out on the water.

You can fish spinners in almost any kind of water and that is one of the main luxuries of spinner fishing. Spinners are fished best by essentially drifting them through holes. Like any drift set up you want to keep the spinner close to the bottom. Cast the spinner upstream and float it down through the hole all the way to the tail out, slowly reeling it towards yourself the whole time. Once the spinner gets close to the tail out where the water is going to be faster, make sure you slow down the retrieve or give the spinner some line to keep it close to the bottom. Do this through the entire hole, if there is fish in the hole, it will be game on most of time. The other place that you want to make sure to fish the spinner is in riffles and fast oxygenated water. As the summer goes on and a lot of rivers decrease the amount of water they have, fish will be in search of oxygen and cool places to be. A lot of times if you run your spinner through these areas an active fish will not be able to resist the spinner. Don’t wait any longer to get out there and fish spinners for these hard to catch summer steelhead. Right now is the time to do it! Good luck out there! Once the addiction starts it never stops!
Your Crazy Addicted Fishermen Marlin LeFever aka The Bassinpimp

Welcome to the fly fishing section of Fishing addicts Northwest. We hope to hear and learn about your insight in the sport of fly fishing. In these articles we take a no bull crap approach to the sport we love.

To be soundly educated in the sport of fly fishing, and be able to match knowledge with others you dang near have to live for the sport, sometimes it means sacrificing maybe some friends, time, money, jobs, and relationships (she’s not worth it). To the dedicated fly fisher finding the balance between chasing the steelhead in the upper east fork, locating the scrappy brookies in the small spring creeks, matching the hatch in a still alpine lake, and the trials of everyday life is often challenging. After all, once the addiction starts… it never stops. In our next month article we will be covering the preseason preparations for the June 1st opener.

by
-Lonny Brooks aka tight-lines
& Cody Lindberg aka troutbum89

To  many anglers Spring Chinook is one of the best tasting fish the North  West has to offer. Anglers each year head to the Columbia to try their  luck in hooking these amazing fish. Typically you’ll find that the  Willamette will start producing fish before the Columbia. This is because  smolts are released from the Willamette a little sooner than the rest  are released.

A relaxing, fun and successful way to catch these fish is anchor fishing.  This can be done on any river that is tide affected but found most popular  on the Columbia River and Willamette. The first thing you must always  be aware of is your tide. The only way to properly fish on anchor is  to fish an out going tide. This will keep your boat straight on anchor  and give your plugs the action they need to work in the water. The best  way to get started is venturing out and exploring holes with a fish  finder. You want to find water anywhere from 18-30ft. You can find fish  in other water as well but these depths are more common to hold fish  this time of year. Using your fish finder you want to find holes that  provide shelves or drop offs. Often times these salmon will just lay  behind these shelves looking for slower water to rest in before continuing  their journey upriver. Once you find shelves the best thing to do is  mark your location on your GPS either on your fish finder or a hand  held. If you don’t have either you can still manage it just may take  longer to locate the shelf next time you go out. The best thing to do  if you don’t have a GPS is try and memorize something along the shore  directly across so next time when you come back you can line yourself  back up and come close to getting in the same spot. Once on anchor you’ll  want to start getting your gear ready to go. I prefer to fish a braided  line either 50lb power pro or tuff line when fishing plugs or spinners.  This is because there is no stretch in your line which increases your  hook sets because fish will often hook them selves before you even grab  your rod. From my braided line I run it to a spreader which looks just  like heavy gauged wire bent in a 90 degree angle with swivels on the  ends. Three way swivels will work as well but you’ll find the spreaders  prevent tangles and frustration. From there you’ll want to tie an  18”-24” 15lb mono dropper line down from your spreader. This is  the line that connects down to your weight. Weight size may vary depending  on the current but for the most part 8-10oz will work. The reason I  run a lighter monofilament line for my dropper is because if your weight  snags on the bottom you want your weight to break loose first. This  will hopefully save you from having to re-rig a whole set up and also  save money. All that’s left to do now is tie on your plug. I like  running Luhr Jensen Kwikfish in a size K14 or K15. Colors will always  vary but there are few that seem to be winners each year. One of my  favorite is one many refer to as the “Double Trouble” it’s a chrome  body with Chartreuse on each end. The most key part to this whole setup  is making sure your plug is properly tuned. To do this put your plug  in the water and pull it upstream and watch the action. A properly tuned  plug will always stay straight inline and not pull to one side. If your  plug does run to one side you’ll want to tune it by adjusting the  eyelet your line connects to. If your plug pulls to the left turn the  eyelet to the right and vise versa if it pulls to the right. Now that  the plug is properly tuned wrapping your Kwikfish with bait will greatly  increase your catch rate. You’ll find the majority of everyone fishing  will be using Sardine fillets which you can buy filleted already or  take whole sardines and fillet them yourself either is fine. The reason  sardine is chosen over many other baits is because of its oil content.  Being that’s it’s a very oily fish it leaves a stronger scent in  the water attracting more fish to your plug. Wrapping your plugs is  easy I start by cutting fillets down to about 1” X 2” fillets. You’ll  want to place your fillet on the belly of you plug. So in order to do  that cut a slit about half way up the fillet. Using that slit you can  now slide it around the hook on the belly of the plug. Magic thread  or miracle thread is a couple threads out there you can use to wrap  your plug. I like to start at the back of the plug and work my way to  the front of the plug then wrap back towards the back making a total  of about 20-30 wraps. To finish it off just make several half hitch  knots and this will keep your bait secure. Now you’re ready to put  your lines in the water. Make sure to check your drags ahead of time.  You want a drag that is snug but not tight and not too loose. If a fish  hits you want them to be able to take line. You’ll find more fish  will hold the plug longer with a looser drag which equals more hook  ups. Hopefully some of these tips will help bring more fish to the boat  this year good luck!